IPC2U Group: EPC-7510F Fanless Embedded Server supports DVI, PCMCIA, CF, PCIe, PCI

Features

• 100% Fanless Design
• All-in-one Cable Design
• Dual/Triple Independent Displays
• uDoc Support
• General Purpose I/O
• Lockable SATA connector
• PCI104 Expansion Interface
• PCIe x1 Expansion Module
• Flexible 1x, 2x oder 3x PCI Slots
• Removable SATA HDD Module
• Embedded OS Support
• Anti-Schock and Vibration Design

EPC-7510F is an all-in-one wireless design that integrates all I/O ports into the PCB to avoid extraneous messy I/O cables causing installation difficulties and system instability. For expansion ports, the PCI104 interface is built into both the product and the back plane design of the PCIe 1x interface. This kind of interface design will prevent issues relating to bad connections and insecure assembly when using a riser card, and therefore greatly improve system stability and ease of installation. It is also easier to disassemble and will meeting the requirements of environmentally friendly designs.

Dual/triple independent Display

EPC-7510F utilizes the highly efficient Intel 915GM chipset along with the Chrontel CH7307/CH7308B. In addition to the powerful graphical engine provided by the GMA900 chipset, it also features both the VGA/LVDS and VGA/DVI dual display modes. System expansion modules can also be used to add external PCIe/PCI discrete video cads for up to 3 simultaneous displays. For HD (High Definition) displays, the Chrontel CH7308B chip supports 18 or 24-bit single/dual channel LVDS to directly support the 1920x1080p HDTV display quality. This is the ideal choice for KIOSKs and Digital Signage applications.

USB DOC Support

USB DOC is a specialized solution for the industrial grade USB interface DOC (Disk On Chip). Storage capacities can reach up to 2GB for the installation of real time operating system (RTOS) and application program (AP). The onboard Flash RAM modules also provide a unique shockproof design to ensure a stable system operation even under the harshest conditions.

General purpose I/O

General Purpose Input Output (GPIO) is commonly used for switch controls or status monitoring functions. EPC-7510F provides 1 set of 8-bit programmable GPIO ports to adapt to their I/O applications.

Lockable Serial ATA connector

Serial ATA is an all-new serial interface that is faster and more reliable than the Parallel ATA bus. The Serial ATA cables and connectors have also been improved to eliminate the pins of the PATA bus that are easier to plug-in and align. EPC-7510F has 2 sets of lockable SATA ports that can simultaneously support a 2.5" slim SATA HDD and a 5.1/4" SATA HDD for a more flexible selection of storage devices for the client.

Industrial PCI104 Expansion Interface

The PCI104 interface provides a 32-bit industrial grade expansion interface that is highly shockproof and reliable. It is especially applicable in high-vibration environments such as vehicle transportations and machinery equipment. EPC-7510F provides a PCI104 built-in interface that does not require extra expansion modules.

Powerful PCIe x1 Expansion Module

PCI-Express x1 is a next generation I/O interface standard that provides 500MB/sec of data bandwidth for high-speed I/O applications. EPC-7510F provides a single PCIe x1 expansion slot, which may be used with various high-speed external cards such as the IEEE1394, SCSI, SATA, VGA, and H264 hardware decoders

Flexible 1/2/3 Slot PCI Expansion Module

PCI interface is a 32-bit expansion interface that provides 133MB/s of data bandwidth. The interface satisfies various I/O requirements, and it is commonly used in all sorts of industral applications. EPC-7510F provides 1/2/3 PCI slots for PCI expansion cards that feature a unique back plane and flexible assembly design that can be accessed without replacing the original external case.

Removable SATA HDD Expansion Module

EPC-7510F provides hot-pluggable 5.1/4'' SATA HDD expansion modules for multimedia files. The expansion module can be installed with hot-pluggable 500GB SATA hard drives. The user can easily perform data maintenance and back tasks without interrupting the system operation.

Embedded OS support

EPC-7510F provides a powerful x86 hardware platform that features an Intel IEGD Driver and IEGD VGA BIOS for a reliable system platform. The embedded operating system supports Microsoft XP embedded and WinCE BSP (Board Support Package). The system is highly software compatible because it incorporates Microsoft embedded operating systems with a complete set of drivers and application software. This can greatly reduce system development cost and the time-to-market for the products. The small footprint of the embedded OS images can be directly installed into the USB DOM or CF cards that feature powerful and fast startup times and damage prevention mechanisms. This will form an ideal embedded system package for our clients.

Anti-Shock and Vibration Design

EPC-7510F takes into consideration the anti shock and vibration design requirements for transportation and mechanical equipment tolerances, and has been specially designed for such purposes. Unnecessary cables are reduced and connectors, such as the SATA interface, are designed to be lockable as prevention measures. Shock sensitive devices such as the hard drive are designed according to anti-shock and anti-vibration requirements, and the entire system structure has been certified by MIL and IEC anti-shock testing standards to ensure system stability.

Due to its fanless, high performance, compact size, sturdy structure, and excellent anti-shock design, EPC-7510F is applicable to various automation application fields including Industrial Automation, Machine Automation, transportation Application, Digital Video Surveillance, Gaming Machine, and Digital Signage etc.