Low Power PCI Bus CPU Card with DualView, Dual LAN, SATA-150 and DVI Interface -- SBC82820

The SBC82820 is a general purpose PICMG v1.0 compliant half-size PCI bus CPU card which supports 400/533MHz front side bus Intel® Pentium® M and Celeron® M processors. AXIOMTEK’s half-size PCI bus CPU cards furnish high speed and wide bandwidth computing power as well as plug & play, flexible bus mastering and interrupt sharing. This slot CPU card is equipped with two DDR2 SODIMM sockets which provide maximum up to 2GB system memory capacity; this slot CPU card is extremely nice to have dual channels for typical Intel DDR2 memory architecture enabling real full speed performance.

For large size LVDS LCD compliance, the SBC82820’s LCD interface is through SDVO port of the integrated graphic controller with LVDS transmitter to support single and dual channels 24-bit LVDS signal interface. In the meanwhile, on the edge of the I/O outlet, it also provides DVI-I interface for both CRT and DVI-D displays. By these display interfaces, the low power singe board computer can perform fully DualView features configured as CRT plus LVDS or CRT plus DVI-D or DVI-D plus LVDS types.

Taking the advantages of ICH6M’s rich integrated I/O functions, the PCI bus slot CPU card provides two onboard PCI Express x1 bus Gigabit Ethernet ports, one PATA-100 port, two SATA-150 ports, DMA CompactFlash type-II socket, 4 USB 2.0 ports, AC’97 Audio with amplified, and SMBus for customized monitor/control interface. Remaining the traditional industrial automation functions compliance, the SBC82820 continues to provide two COM ports as RS-232 and RS-232/422/485 with auto-flow control, PS/2 keyboard/Mouse and SPP/ECP/EPP parallel port.